FLOWDRILL / THERMDRILL TOOLS
(Threading into thin wall
steel)
REPLACES & SUPERCEDES NUTSERTS
This drilling tool is Made in Germany. Designed for thin wall sectional steel requiring a thread ie; RHS, pipe & tube, sheet metal.
Simple operation drilling in a mill or drill press.
Requires only 2 Morse taper capacity to burn thru. a hole, then tapping with a form tap.
Flowdrill Collet Chuck Set - Suits Thermdrill
The Flowdrill adaptor makes working with THERMDRILL simple & easy to use,
it gives you a significant increase of productivity that reduces your
production time by up to 50%. Includes;
- ER32 x 2MT collet chuck adaptor
- ER32 x Ø4-Ø3mm collet
- ER32 x Ø6-Ø5mm collet
- ER32 x Ø8-Ø7mm collet
- ER32 x Ø10-Ø9mm collet
- 3MT sleeve
- Collet spanner
- Chuck Spanner
|
|
|
|
|
|
|
Code |
||||
|
Model |
FD-32 |
FD-F5 |
FD-C5 |
FD-F6 |
|
Type |
Flowdrill Kit |
Thermdrill Form |
Thermdrill Cut |
Thermdrill Form |
|
Size |
ER32 - 2MT & 3MT |
Suits M5 |
Suits M5 |
Suits M6 |
|
Material Thickness - Maximum |
~ |
2mm |
3mm |
2mm |
|
Recommended rpm - Mild Steel |
~ |
2,200 - 2,500rpm |
2,200 - 2,500rpm |
2,000 - 2,400rpm |
|
Recommended rpm - Stainless Steel |
~ |
1980 - 2250rpm |
1980 - 2250rpm |
1800 - 2160rpm |
|
Recommended rpm - Aluminium |
~ |
3,700rpm |
3,700rpm |
3,600rpm |
|
Collet Sizes |
4-3, 6-5, 8-7, 10-9 |
~ |
~ |
~ |
Working with
THERMDRILL gives you a significant increase of productivity by reduction of
production time up to 50%
THERMDRILL is specially ground and made out of solid carbide. Generating
friction heat while drilling it displaces the thin walled material without
producing any chips
Within seconds it forms a bushing underneath the work-piece from the existing
material
This extra thickness comes without any additional material or inserts and is
now offering enough space for the threads which are introduced in the second
step.
Features
- Steel - recommended 2,200 ~ 2,500rpm to produce correct form
- Stainless Steel - recommended 1,980 ~ 2,250rpm to produce correct form
- Aluminium - recommended 3,700rpm to produce correct form
- No more wobble, loosening or twist (like with rivet nuts)
- 100% no twist because it´s made out of one piece
- Especially suitable for round tubes
- Secure hold also for sheet metal and special section tubes
- No waste because of chip-less process by using friction heat
- Better quality of the thread by thread forming instead of cutting (material
solidification)
- Long life of the tools by polygonal grinding hard metal
-
- How it works. Stable threaded bushing in only two steps
- With the THERMDRILL method you create in seconds with only two steps
extremely stable threaded bushings made out of one piece.
- Note: Requires thread shaper to form actual thread - (T890)
Available to thread M5, M6, M8. However each thread size requires a carbide Thermdrill form tool
